Netgear EAX80 is one of the best networking devices that works with your existing WiFi in order to create a powerful whole home mesh WiFi. Once you are done with Netgear EAX80 setup, you will get high-speed internet to access in which there are reduced coverage areas or dead zones. So, setup Netgear Nighthawk extender (EAX80) and get:
Capacity
WiFi 6 gives you improved network capacity for more WiFi devices. Have more fun with the uninterrupted 4K/8K streaming, gaming, and the smart home experience.
Speed
Get ultra-fast wireless speeds with more connections for all devices with less congestion. You’ll get some blazing connection speeds of more than one Gigabit per second or more, 4K/8K streaming, & VR/AR gaming.
Range
Experience reliable and stronger WiFi coverage indoors and outdoors for all your devices. It enables expansive coverage for your smart home with wider range to cover every corner of your home even where your router WiFi cannot reach.
But, if you want more speed to far corners of your house, like from courtyard to backyard, balcony to terrace garden of your house, you must install AT&T Fiber aka router in your home and connect it with your range extender.
What is AT&T Fiber Router?
AT&T Fiber router is one of the best WiFi technologies that allow the internet services to be used wirelessly with your WiFi enabled devices. The WiFi devices, such as Smartphone’s, computers, and laptops, connect wirelessly to your Netgear EAX80 instead of using an Ethernet cable.
Just connect AT&T Fiber with Netgear EAX80 and see the difference. What happened? Are you wondering about how to do so? Wonder no more because Google have redirected you to the right post. Here, in this informative post, we have provided instructions on AT&T Fiber with Netgear EAX80 extender in a snap. So, without much delay, let’s get the ball rolling!
Connect AT&T Fiber with Netgear EAX80 Extender: Complete Steps
Power on Your Netgear EAX80 Extender
First things first, you need to power on your Netgear EAX80 extender by plugging it in to a working power socket. Ensure that the socket you have chosen for your WiFi range extender is not damaged and providing steady electricity to your Netgear device.
Turn on Your AT&T Fiber Router
Once you are done with turning on your Netgear EAX80 extender, the next thing that you need to do is to turn on your AT&T Fiber router.
Ensure to plug in closer to each other. In case you don’t have two wall plugs for plugging in your devices at close proximity, call up an electrician and install a one.
Take an Ethernet Cable
Now, the next instruction to connect AT&T Fiber with Netgear EAX80 extender is to grab an Ethernet cable. Make sure that the cable you use for connecting your smart WiFi devices must be well-working. If you find damages in the cable, replace it with a new one right away instead of putting it in use.
You are all Done!
After having a well-maintained Ethernet cable handy, insert one end of the cable into the internet port of your Netgear EAX80 extender and other end in the LAN port of AT&T Fiber router.
In this way, you can connect AT&T Fiber with Netgear EAX80 extender using an Ethernet source.
Connect Wirelessly
If you don’t want to indulge yourself into the clutter of messy wires for connecting the devices, then you can use wireless source instead. To do so, place your AT&T Fiber router and Netgear EAX80 extender at a safe distance. Once you are done, look for the WPS button on your devices. And, once you found the, press the WPS button on your Netgear EAX80 extender and within a minute, press the WPS button on your AT&T Fiber router.
In such a way, your smart devices can be connected wirelessly.
Log in to Netgear EAX80 Extender
After connecting your smart devices using an Ethernet or wireless source, the next thing that you need to do is to adjust the settings. For this, log in to Netgear EAX80 range extender using mywifiext.net or 192.168.1.250. Once you are done, reach the extender’s dashboard using EAX80’s default username and password.
Soon after reaching the extender’s dashboard, setup Netgear Nighthawk extender and update its firmware by following the on-screen instructions.
Log in to AT&T Fiber Router
From a client device that is connected to the AT&T WiFi network (SSID), open the web browser of your choice and go to http://att.wirelessinternet. Enter the admin login in the required fields, and click Login.
The AT&T Fiber router’s default admin login credential is “attadmin” (without quotes). The admin login details can be found on the bottom of the device. Once you are logged in successfully, follow the on-screen instructions to set up and update the firmware of AT&T Fiber Router.
Endnote
Now, we are ending our article with this hope that the information we have provided here will help you connect AT&T fiber with Netgear EAX80 extender.
Here you also can read about Linksys Router Password Not Working Issue.
