Linksys Extender Not Showing Up – Easy and Practical Solutions

If you want to connect to the WiFi network of a Linksys extender, then it is necessary that it shows up on your network list. But, things can be different when the situation is completely opposite. Yes, we are talking about the Linksys extender not showing up issue. This is to inform you that this problem can deprive you from reaching the Linksys DHCP settings on a computer if it is already not present on the Linksys network. But, that’s just one scenario. This problem is much bigger than you are thinking. The reason being, it has the caliber to stop internet access on all the wireless devices that are prospects to Linksys range extender.

To get rid of the problem and return your networking experience to its normal state, we have jotted down some information in the form of this post. After walking through the same, you will be able to see the Linksys extender network name on the SSID list of your client device very soon.

First of All, Enable SSID Broadcast

If the Linksys extender is not showing up on your network list, then its most prominent reason might be a disabled SSID broadcast. How can you expect the WiFi name to appear on the network list if it is actually hidden? That is why we suggest you to enable the SSID broadcast on your Linksys range extender. Simply, log in to your range extender by connecting a computer to its LAN port via an Ethernet cable.

After that, you are required to access the Extended Network Settings and enable the SSID broadcast. Once done, refresh the network list of your client devices and see if you are able to see the network name of your extender or not. If not, then the problem might require further troubleshooting. Read on to know.

Solutions: Linksys Extender Not Showing Up

  • Restart the Linksys Extender: Sometimes, it is a technical glitch due to which the Linksys extender starts behaving abnormally and hence fails to broadcast its SSID. To get rid of these glitches, we suggest you restart the extender. You do not need to make many efforts. Just get up from your seat, disconnect the extender from the router, and power it down. After waiting for 10-15 minutes, you can power up your extender and create connections.
  • Get Closer to Extender: Is it just one device on which you are unable to see the extender’s network name or the problem is with all the wireless clients. On the off-chance, you are facing the problem with just one device, you are suggested to bring the device in the WiFi signal range of the extender. Know that devices won’t communicate properly if the distance separating them is too much. After that, see if the Linksys extender not showing up problem gets resolved or not.
  • Upgrade the Firmware: Do we need to mention about the importance of updating the extender’s firmware via the Linksys extender login portal? Well, we don’t feel like that. That is why, we’ll just ask you to update the extender’s firmware as soon as possible to get rid of the problem you are facing. You just need to launch an internet browser on a device connected to the Linksys extender and access its management panel. Locate the option that allows you to update the extender’s firmware and click it. Lastly, upload the file and wait for the process to get completed.

The Concluding Words

With the help of the hacks jotted down above, you will be able to get rid of the issue you are facing with your Linksys extender. It is now assumed that the Linksys extender has appeared on the WiFi network list of your device. However, we would like to tell you that when the extender is placed in an area where it experiences signal interference, it is most likely to make you a victim of the issue that we discussed. Thus, ensure that your extender is placed away from devices that emit electromagnetic frequencies and objects that contain a large amount of water.

Hundred to one shots, if the problem is still adamant to leave your side, you are free to take the help of the factory default reset method to make things normal. But, do not forget to set up the extender after that.